Tandy 1000 Games
From CloudyEggs Wiki
Jump to navigationJump to searchThis is for examples of DOS games on MS-DOS Games that are able to run on Tandy 1000 data. (YOU ARE REQUIRED TO HAVE TANDY 1000 DATA TO RUN THESE)
Examples[edit | edit source]
- Exit to DOS first, then type BUBBLE R, you'll get a configuration screen, set your graphics to Tandy graphics, and you can choose any of the sounds, especially Tandy, which will make the music sound somewhat similar to the Master System port's tune.
- At first glance on Tandy 1000 data, you can't play the game due to showing only VGA and EGA options. But exit to DOS, you can type tgalemmi to play the Tandy game, also for Tandy sound type sbtype=none before doing so.
- At first glance on Tandy 1000 data, you can't play the game due to showing only VGA and EGA options. But exit to DOS, you can type TGALEMM2 to play the Tandy game, also for Tandy sound type sbtype=none before doing so.
- At first glance its impossible to play on Tandy 1000 data, however the game does start but unable to display due to the VGA graphics error, so after the music ends press right 3 times then press enter, then press down 3 times then press enter, if successful, you'll arrive at the quit screen, and now change the graphics setting to Tandy and it will work, you can even set the sound to the 8-bit Tandy music.
- At the setup screen, you can set up video system to Tandy, and for sound you can leave it blank for PC Speaker, set it to Sound Blaster, or go with Sound Source with Tandy Adapter, the Tandy sound is just deformed voices tho, not 8-bit music.
- The game starts with Tandy graphics, but for Tandy sound, exit the game, type sbtype=none, then type RFL.
- By default the CGA is just pink blue white and black. But being Tandy 1000 data, much better color will be shown meaning Pluto is yellow, grass is green, and stuff like that.
- The game starts with Tandy graphics, but for Tandy sound, exit the game, type sbtype=none, then type tmprog.
- There is a graphics selection screen, select Tandy.
- There is a graphics selection screen, select Tandy. Also note that the game plays faster and smoother, but however this makes the game as short as 4 minutes.
- The game won't start at first glance, what you need to do is press esc to go to the setup menu, and change the display to Tandy 1000 mode. While the color isn't as good as the EGA one, it is good enough.
- It even supports Tandy graphics, to play it with Tandy sound, exit to DOS, type sbtype=none, then type PAKU
- It won't have sound, but on Tandy data it sets to Tandy graphics.
- It will set graphics to Tandy with this data.
- The game won't start at first glance, what you need to do is press esc to go to the setup menu, and change the display to Tandy 1000 mode. While the color isn't as good as the EGA one, it is good enough.
- You don't have to do anything, it will start with both Tandy graphics and Tandy sound.
- At the selection screen, choose the Tandy graphics card.